Sonicwarper is coming soon. Do sign-up to our mailing list to be notified when Sonicwarper is launched.

Sample Project

Getting Started - Sample Project

In this guide, we will set up Sonicwarper to play the following 2-song set:

Both the set and the setup is inspired by the following excellent DJ Tech Tools tutorial:

See this demo video to get a sense of how it's played, and how it sounds like:

Video Coming Soon

First, make sure Sonicwarper is set up properly. See section - Setup - for instructions to do so.

This guide outlines the settings to set up the sample project. If you're not already familiar with the the concepts behind how Sonicwarper works, it is strongly recommended that you first go through the following guides first:

This is an overview of our mapping:

Project Mapping Overview
Project Mapping Overview

We will be using all 4 FX units in Traktor Pro. These are their settings:

Traktor Pro FX Unit Settings

To ease setup - we will be configuring a button - labeled in the mapping overview - to set up our FX Units with a single touch.

Configuration Settings for Button

We need to able to quickly map/unmap our FX Units to the deck of our choosing with a single touch.

To achieve this, we'll configuring a button to toggle between routing/un-routing FX Units 1-4 to a deck. For our setup, we'll configure 2 buttons - 1 for Deck A and 1 for Deck B .

Configuration Settings for Button

We want the look of the button to say "Map" or "Unmap" depending on whether the effects have already been mapped. If all the conditions of this look are not met, then the default look is used.

We want the behavior of the button to unmap all FX Units to Deck B if all of them are mapped. Otherwise, the default behavior (i.e. map all FX Units to Deck B) will be active.

Configuration Settings for Button

Next, we want the look of the button to say "Map" or "Unmap" depending on whether the effects have already been mapped. If all the conditions of this look are not met, then the default look is used.

We want the behavior of the button to unmap all FX Units to Deck A if all of them are mapped. Otherwise, the default behavior (i.e. map all FX Units to Deck A) will be active.

We will toggling our effects on/off and changing their states and values "improvisional-ly" during play and we need a quick way to turn all effects off and set their values back to default so we can start from the beginning again the next. So, we will configure a button - button - to do just that.

Configuration behaviors for Button

We want to control the Digital LoFi effect with the "Dive/Raise" motion of the device. So, we will configure Button (5) to toggle between mapping/unmapping of the effect to the motion with every tap.

Configuration settings for button

We want to control the Transpose effect with the "Dive/Raise" motion of the device. So, we will configure Button to toggle between mapping/unmapping of the effect to the motion with every tap.

Configuration settings for button

We want to control the Beatmasher 2 effect with the "Rotate" motion of the device. So, we will configure Button to toggle between mapping/unmapping of the effect to the motion with every tap.

Configuration settings for button

We want to control the Gater effect with the "Rotate" motion of the device. So, we will configure Button to toggle between mapping/unmapping of the effect to the motion with every tap.

Configuration settings for button

We want to control the Filter effect with the "Steer" motion of the device. So, we will configure Button to toggle between mapping/unmapping of the effect to the motion with every tap.

Configuration settings for button

We want to control the Filter LFO effect with the "Steer" motion of the device. So, we will configure Button to toggle between mapping/unmapping of the effect to the motion with every tap.

Configuration settings for button

We want to configure Button to toggle the Reverb effect on/off.

Configuration settings for button

We want to configure Button to toggle the Delay T3 effect on/off.

Configuration settings for button

We want to configure Button to toggle the Delay T3 effect Freeze button on/off.

Configuration settings for button

That's it, we're done. Feel free also to experiment with mapping mixing controls such as levels and triggers onto Sonicwarper.